Lecol (Wakol) MS 260 Parquet Adhesive is a high tensile strength adhesive specifically designed for engineered and parquet floors. It is supplied in an 18 KG tub.
Lecol MS 260
Parquet Adhesive has one major difference to traditional fixed adhesives, in that the product is flexible. Floors installed using this type of adhesive are always allowed to move more than a floor fitted with a traditional solid curing adhesive. Wakol MS 260
has a high tensile strength formula which reduces the risk of excessive movement.
The advantage is that Wakol MS 260 can be used for a much wider range of applications than its competition, e.g. installing distressed floors without the risk of the adhesive staining the floor. The high initial grab of Wakol MS 260 makes it ideal to fix all engineered wood floors directly to the sub floor. Also suitable for the installation of wide solid boards up to180 mm, end-grain parquet and 14mm solid wood direct to the sub floor. Floors fixed with Wakol MS 260 can also be finished with water based lacquers with none of the usual issues.
Advantages of Lecol (Wakol) MS 260 Plus:
Single component adhesive
Solvent and water free
No known allergic reactions
Easy to remove from pre-finished floors
No dirty hands
Suitable for under-floor heating systems
Very good filling properties
Flexible / high tensile strength
High initial grab
100% solid content
Coverage per m sq: 800-1400g depending on trowel used and how porous the sub-floor is.
Notes about coverage:
In our tests, we have found that the consumption rate is usually around 1kg per m sq but it is essential that the correct trowel is used. A trowel with a spread rate of 1kg per m sq is needed such as our Bona Trowel which is available to buy here
Coverage rate is also determined by how porous and level the sub-floor is. You should have no problem achieving 1kg per m sq on a level, non-porous floor.
Supplied in an 18 KG tub.